Gunstreet SG Wiring Harness - Jimmy Page Gunstreet SG Wiring Harness - Jimmy Page
Gunstreet SG Wiring Harness - Jimmy Page
Gunstreet SG Wiring Harness - Jimmy Page

Gunstreet SG Wiring Harness - Jimmy Page

SKU: GSWH-SG-M-5JP

$169.95

Our kits are a perfect drop-in replacement for your SG style guitar, whether you want to change how your instrument sounds, or just want to improve the durability we have something perfect for you!

Filter circuit Options:

  1. Red-50’s Wiring(Vintage High Pass Filter) This wiring was found in the first gen of electric guitars. It features a transparent sound as you roll off the volume at the cost of a steep volume taper and an on/off tone control

  2. Blue- Modern Wiring: (Low pass Filter) This comes standard in most instruments and is what most people are familiar with when it comes to functionality. This style is what you call a low pass filter, meaning as you roll the volume down more highs will disappear.

  3. Green-Volume Bleed (Modern High pass Filter) Often called a “treble bleed”, this circuit changes the modern wiring into a high pass filter. Get this kit if you like to use both your volume and tone control a lot and want more highs at lower volumes.

Secondary Circuit: Jimmy Page wiring:

  • Volumes
    • Switch Down-Humbucker
    • Switch Up-Single Coil
  • Bridge Tone
    • Switch Down-Normal
    • Switch Up-Out of Phase (only in middle toggle switch positioin)
  • Neck Tone
    • Switch down-Normal
    • Switch Up-Bridge and Neck in Series/killswitch in Bridge toggle switch position

Please Note: Photos are examples of our kits.This may not look like what you recieve. Changing options like "Filter circuit" not only changes the circuit itself but also changes the color of heatshrink. Choosing different "Pots" changes the style or brand of pot. If you have any questions either double check our "part info" or contact us!

Part Info

Raw parts

Metric Pot

  • Taper style: Audio

  • Shaft Diameter: 6MM

  • Shaft Length: 9.52MM (3/8th)

  • Knob Pattern: Coarse

  • Nut thread: M8 x 0.75

  • Metric Push Pull Require Depth: 1-1/16th”

Bourns

  • Taper style: Audio

  • Shaft Diameter: 3/8” (9.52MM)

  • Shaft Length:

  • Short shaft: 3/8th (9.52MM )

  • Knob Pattern: Coarse

  • Nut thread: 3/8 x 32

  • Bourns Push Pull Require Depth: 1-1/16th”

Switchcraft

  • Required Body cavity depth: 7/8”" (22.23MM)

  • Mounting hole diameter: 1/2" (12.70mm)

  • Thread height: 11/32” (8.74MM)

  • Thread Pattern: 15/32x 32

  • Switch tip Thread: 8-32

Neutrik Rean mono jack

  • Required mounting hole diameter: 3/8" (9.53mm)

  • Thread: 3/8 x 32

  • Thread height:3/8" (9.53mm)

Requirements (Must Read)

  • This requires 4 conductor pickups
  • Because of how this circuit is designed and how it’s playing with the mechanics of your pickups, this circuit is very prone to outside feedback and in rare cases causes an “audible ground path,” we suggest installing this kit in a properly shielded cavity to help limit the effects of issues stemming from things like amps, pedals, power supplies, and even your houses wiring!
  • Converting an Import guitar to US spec
    • US spec pots like CTS or Bourns will require you to enlarge the stock pot holes to be 3/8th
    • If swapping to CTS you will need new "Fine Knurled" knobs
    • Import cavities are different then US spec guitars. Double check if your cavity can fit a Right angle toggle switch. If it cannot, during checkout in our "Order notes" let us know you need a straight toggle switch and we will change that
  • Getting the correct knob can stop you from damaging the pot when installing
    • Choosing Bourns or Import Versions will require an 18th tooth "Coarse" Knurled knob
    • Choosing a CTS Version will require a 24 tooth "Fine" knurled knob
  • SG bodies come in many different thicknesses. Make sure your cavity can fit a Push Pull as some will be too thin

Our Gunstreet Promise

We take our quality very seriously. That's why we only use real trained technicians who hand build each kit, and then send it through our proprietary testing process where we audio test every control, switch, or option to make sure that when you received the item it is free of any hums, crackles, or pops!

Instructions

Kit comes stock with a diagram. Online instructions coming soon.

Quantity:

You may also like

Recently viewed