Gunstreet Les Paul Standard Wiring Harness - Custom Jimmy Page

Custom Gunstreet Metric Push pulls

• Taper style: Custom Audio

• Shaft Diameter: 8MM

• Shaft Length: 9.52MM (3/8^th)

• Knob Pattern: Coarse

• Nut thread: M8 x 0.75

Bourns Push pull

• Taper style: Audio

• Value: 500k

• Shaft Diameter: 3/8” (9.52MM)

• Shaft Length:

  • Short shaft: 3/8^th (9.52MM )

  • Long shaft: 3/4^th (19.05MM )

• Knob Pattern: 18 Tooth Coarse

• Nut thread: 3/8 x 32

Custom new Gunstreet Toggle Switch Specs

Our new easy to install switch offers a better overall quality compared to Switchcraft. All while offering a quieter switching experience.

• Body cavity depth 5/8" (15.87mm)

• Mounting hole diameter 1/2" (12.70mm)

• Thread height 7/32" (5.56mm)

• Switch Tip Threading: M4

Learn more about it and our new Gunstreet pots hereCDE “Orange Drop” Capacitor

• Value: 0.047UF

• Tolerance:+/- 10%

• Voltage (Size): 400v

Neutrik Rean mono jack

• Required mounting hole diameter: 3/8" (9.53mm)

• Thread: 3/8 x 32Thread height:1/4" (6.35mm)

• This requires 4 conductor pickups

• Because of how this circuit is designed and how it’s playing with the mechanics of your pickups, this circuit is very prone to outside feedback and in rare cases causes an “audible ground path aka a ghost pickup sound” Although this wont fix everything in some rigs we suggest installing this kit in a properly shielded cavity to help limit the effects or issues stemming from things like amps, pedals, power supplies, and even your houses wiring!

• Converting an Import guitar to US spec
  • US spec pots will require you to enlarge the stock pot holes to be 3/8th
  • When converting you will want to Choose "3/8th Short Shaft" for the correct thread length

• 

• VERY IMPORTANT: These Pots require an 18-tooth "Coarse" knurled knob. If you are swapping from a CTS pot to a Gunstreet pot, new knobs will be required.
• Proper installation of the correct knobs is crucial to prevent damage. Applying more than 30 lbs of upward or downward force can damage the potentiometer, or shaft. Remember, never forcefully pull a stuck knob; instead, "walk it off."
• Most Gibson curved tops require a "3/4th Long Shaft"

We take our quality very seriously. That's why we only use real trained technicians who hand build each kit, and then send it through our proprietary testing process where we audio test every control, switch, or option to make sure that when you received the item its free of any hums, crackles, or pops!

How to install a 50s, Modern, or Volume Bleed Jimmy Page kit in your Les Paul Style Guitar