Gunstreet Telecaster Classic Wiring Harness - Bill Lawrence 5 Way

Switch

• Brand: Oak

• Cavity Depth Needed: 1-7/16” (36.51mm)

• Screw Spacing: 1-5/8” (41.28mm)

• Lever Stem: .50” x .190” (1.27mm x 4.82mm)

DHE "Gunstreet" Pots

• • • • Taper style: Audio

      • Shaft Diameter: 3/8” (9.52MM)

      • Shaft Length: 3/8^th (9.52MM )

      • Knob Pattern: Solid Metal Shaft 1/4th (6.35mm)

      • Nut thread: 3/8 x 32

    • Values:

      • Single Coil: 250k

      • HS: 500kV-250kT

      • Humbucker: 500k

CDE “Orange Drop” Cap

• Tolerance: -/+10%

• Values:

  • Single Coil: 0.047uf

  • HS: 0.022uf

  • Humbucker: 0.022uf

Neutrik Rean mono jack

• Required mounting hole diameter: 3/8" (9.53mm)

• Thread: 3/8 x 32Thread height:1/4" (6.35mm)

1. Switching from a Import pot to a US Spec pot like CTS will require you to have 3/8th pot holes on your control plate
2. When Choosing CTS pots, you will need a 1/4th diameter knob. The Import 6mm found of most imports, MIM, and MIJ guitar will not fit.
3. Your Neck pickup must be 3 wire or converted to 3 wire

4. Teles with humbuckers in the Neck must have 4 conductor wires.

5. Position 4 do not work as designed with RWRP pickups.

6. You want to make sure your control plate isn't designed only for a 3 way. (most Modern plates can fit this switch) If it wont you will need a plate that can fit the extra switch position(s)

We take our quality very seriously. That's why we only use real trained technicians who hand build each kit, and then send it through our proprietary testing process where we audio test every control, switch, or option to make sure that when you received the item its free of any hums, crackles, or pops!

How to install a Bill Lawrence 5 way wiring kit