Gunstreet PJ Bass Wiring Harness - Classic

SKU: GSWH-PJ-C-5

$63.95

Our kits are a perfect drop-in replacement for your PJ style Bass guitar, whether you want to change how your instrument sounds, or just want to improve the durability we have something perfect for you!

  1. Red 50’s Wiring (Vintage High Pass Filter) This wiring was found in the first gen of electric guitars. It features a transparent sound as you roll off the volume at the cost of a steep volume taper and an on/off tone control that interacts a lot with your volume position
  2. Blue Modern Wiring: (Low pass Filter) This comes standard in most instruments and is what most people are familiar with when it comes to functionality. This style is what you call a low pass filter, meaning as you roll the volume down more highs will disappear.
  3. Green Volume Bleed (Modern High pass Filter) Often called a “treble bleed”, this circuit changes the modern wiring into a high pass filter. Get this kit if you like to use both your volume and tone control a lot and want more highs at lower volumes.

Part Info

450G CTS Series

  • Value: 250k -/+ 15%

  • Taper Style: Audio

  • Shaft Style: Solid Metal Shaft 1/4th” (6.35mm)

  • Thread Height: 1/4th”(6.35mm)

  • Shaft Diameter: 3/8th (9.52mm)

  • Thread:3/8 x 35

Low Frictions Bourns

  • Value: 250k -/+ 15%

  • Taper Style: Audio

  • Shaft Style: Solid Metal Shaft 6mm

  • Thread Height: 3/8th (9.52mm)

  • Shaft Diameter: 3/8th (9.52mm)

  • Thread:3/8 x 35

Capacitor

  • Brand: CDE “Orange Drop” Cap

  • Value: 0.047uf -/+10%

Output Jack

  • Brand: Rean

  • Diameter: 3/8th” (9.52mm)

  • ThreadLength: 1/4th” (6.35mm)

Requirements

  • Switching from an Import pot to a US Spec pot like CTS or Bourns will require you to have 3/8th pot holes on your pickguard
  • When Choosing CTS pots, you will need a 1/4th diameter knob. The Import 6mm found of most imports, MIM, and MIJ guitar will not fit.
  • Some cheap Import Basses cavities are designed for Mini 12mm pots. To install a 24mm Fullsized pot may require routing out some of the cavity
  • If installing this kit in a Bass that doesn't have a pickguard and instead you install it from the back. You want to choose the Bourns option as our CTS pots feature a 1/4th thread length which is designed for a pickguard and will not pass through a wood top.

Our Gunstreet Promise

We take our quality very seriously. That's why we only use real trained technicians who hand build each kit, and then send it through our proprietary testing process where we audio test every control, switch, or option to make sure that when you received the item its free of any hums, crackles, or pops!

Quantity:

You may also like

Recently viewed