FREE SHIPPING ON ALL DOMESTIC ORDERS $75+
How to install
This instruction works for a 50s, Modern, or Volume Bleed wiring kit
Cloth wire instruction
This is the most common pickup lead for JM pickups. If you need others click here for Cloth wire
For these pickups. The pickup color code is this. Just note that every brand uses their own color code. Check with your manufacture to confirm their color code.
Neck
- White PVC is Hot
- Bare is Ground
Bridge
- White is Hot
- Bare is Ground
Starting with the Neck pickup
Solder your Neck pickups "Hot/+" to the hole labelled "Neck"
Solder your Bridge pickups "Hot/+" to hole labelled "Bridge"
Finishing the pickup installation
Solder the Pickup grounds' to the holes Labelled "Ground 1" & "Ground 2" You can do them individually or by combining them and soldering them to a single ground hole. Just make sure that no part of the bare wire can touch any of the other wires as this will kill your audio signal
Finishing the installation
Solder the wire(S) coming from your guitars tailpeice to the casing of any pot. On this example the tone pot was the easiest. If you have Shielded your cavity. Add a jumper wire from the Shielding itself to the wiring harness. Solder the wire to a pot casing just like how we did it with the tailpeice ground wire
And thats it!
Test the controls before restringing the guitar by lightly taping the pickups with a metal object. If you have any questions of need any help Troubleshooting Click here