Thank you for choosing Gunstreet. below is the instructions for a Double Tone Les Paul junior Wiring

Most Common Pickup Wires

Key

H1=

Hot Output

G1=

Ground

Next, Solder the pickups Ground to the casing of the Volume Pot.

Stage One

Volume Install

Solder the Hot Pickup wire to the First Lug on the potentiometer.  See diagram on the left. If not sure which wire is hot please refer to your pickups manufacturers instructions

Grounding the Harness

Solder the Ground Wire coming from your guitar bridge to the Casing of the Tone Pot

How It Works

When Tone Control is in down position your cap value is 0.022uf. when you engage the push pull you value changes to 0.047uf.

If you have any questions feel free to contact us!