Thank you for choosing Gunstreet. below is the instructions for a Volume Bleed Wiring to be installed in your 67 style flying v.
Most Common Pickup Wires
Key
H1=
Hot Output
G1=
Ground
Stage One
Neck Volume Install
Solder the Hot Pickup wire to the First Lug on the potentiometer. See diagram on the left. If not sure which wire is hot please refer to your pickups manufacturers instructions
Next, Solder the pickups Ground to the casing of the Volume Pot.
Repeat these steps for the Bridge Volume
Grounding the Harness
Solder the Ground Wire coming from your guitar bridge to the Casing of the Tone Pot
That's It!
If you have any questions feel free to contact us!