FREE SHIPPING ON ALL DOMESTIC ORDERS $75+

How to install

This instruction works for a Modern or Volume Bleed kit

STARTING WITH THE NECK PICKUP SWITCH

Solder Your Neck pickups "+ or hot" wire to either the 2 or 3 lug on the Neck switch

Solder Your Neck pickups "- or Coil finish" wire to either the B or C lug on the Neck switch

Repeat these steps but with the Bridge Pickup on the Bridge Switch

Feed the Black and White Cloth wires from the switch assembly through the cavity hole

 

Now is the time to attach the Wiring kit to the Control plate.

Installing the Switch assembly

Solder the white switch assembly wire to the far left lug on the Volume pot.

Next,solder the black cloth wire to the casing of any pot. In this example the easiest spot was the Volume pot.

 

Finishing the controls installation

Solder the earthing wire coming from your guitars tailpeice to the casing of any pot. In this example the easiest spot was the Volume pot.

And thats it!

Test the controls before restringing the guitar by lightly taping the pickups with a Metal object.