Thank you for choosing Gunstreet. below is the instructions for a Modern Wiring to be installed in your Les Paul.
Install the switch first
Installing Pickups
PIckup name Key
Black - (+)=Hot Output
red&white - (S)= Series link
green - (-)=Coil Finish
bare - (G) = Ground
Starting with the Bridge pickup
1.Tape off your series link
2.Solder your pickup’s hot to the white wire
3.Solder your pickups coil finish to the colored wire
Next, Solder the bare wire of the pickup to the casing of the pot
Move to the neck pickup
Like with the bridge pickup tape off the series link to the pickups. next, solder the pickup’s hot wire to the left lug on the volume pot
