Skip to content


Your cart is empty

Join the Gunstreet Mailing List

Sign up to the Gunstreet mailing list and become an expert in the circuits and pickups that make your instrument sing.


How to install

In these Instruction photos we will be using Seymour Duncan's Color Code.

  • Black = Hot "+"
  • Red/White Soldered Together = Series Link "S"
  • Green/Bare soldered together = Ground "-"

Check with your pickups manufacture to learn what color code they use.


Solder Your Bridge Pickup's "Hot" also known as "+" on the diagram to the Left open Lug on the Bridge Volumes potentiemeter


Next, Solder the Bridge Pickup's "Series Link" also known as "S" on the diagram to the switch hole labelled "C2" of the Bridge Volume pot

Finishing the Bridge pickup Installation

Solder Your Bridge Pickup's "ground" and "Bare Chassis ground wire" also known as "-" on the diagram to the Metal casing on the Bridge Volumes potentiemeter


Repeat these steps but on the Neck Volume with the Neck Pickup

Finishing the Installation

Solder the Tailpeice ground wire to the casing on any pot. In this example it was the Neck Volume as it was the closest to the wire.If you have Shielded your cavity. Add a jumper wire from the Shielding itself to the wiring harness. Solder the wire to a pot casing just like how we did it with the tailpeice ground wire

And thats it!

Test the controls before restringing the guitar by lightly taping the pickups with a metal object. If you have any questions of need any help Troubleshooting Click here