Skip to content


Your cart is empty

Join the Gunstreet Mailing List

Sign up to the Gunstreet mailing list and become an expert in the circuits and pickups that make your instrument sing.


How to install

Neck Pickup 1: Coil Finish Ground

Solder your neck pickups Coil Finish (Black on Diagram) to the bottom right lug


Neck Pickup 2: Hot

Next, Solder the Neck Pickup's "Hot" also known as the "yellow +" wire on the diagram to the second to the bottom lug

Bridge Pickup 1: Hot

Solder your Bridge Pickup's "Hot" (White wire on the diagram) to the second from the top lug.

Bridge Pickup 2: Ground

Solder your Bridge pickup's Ground wire to the casing of your Volume Pot

Neck Pickup 3: Neck Cover Ground

If your Neck pickup has a cover, you will need to solder it to the casing of the volume pot.

Tailpiece Ground

Lastly, Solder the ground wire that is coming from your guitars tailpiece to the casing of the closest pot. In the video example the tone pot was the closest. Please note that if you don't have a tailpiece ground, you will need a Bridge pickup with a metal plate on the bottom. The screws connecting the pickup to the bridge will turn your bridge pickup's "ground" wire into a tailpiece ground.

Output Wire Install: Hot wire

Next Solder the White "output" to the hot Lug

Output Wire Install: Ground wire

Lastly, Solder the (Colored) ground wire to the Inner Ground Lug Please note that if you don't wire these correctly and reverse the connections you will cause non stop hum  

And thats it!

Test the controls before restringing the guitar by lightly taping the pickups.