FREE SHIPPING ON ALL DOMESTIC ORDERS $75+
How to install
This instruction works for a 50s kit
STARTING WITH THE NECK PICKUP SWITCH
Solder Your Neck pickups "+ or hot" wire to either the 2 or 3 lug on the Neck switch
Solder Your Neck pickups "- or Coil finish" wire to either the B or C lug on the Neck switch
Repeat these steps but with the Bridge Pickup on the Bridge Switch
Feed the Black and White Cloth wires from the switch assembly through the cavity hole
Now is the time to attach the Wiring kit to the Control plate.
Installing the Switch assembly
Solder the white switch assembly wire to the far left lug on the Tone pot.
Next,solder the black cloth wire to the casing of any pot. In this example the easiest spot was the tone pot.
Finishing the controls installation
Solder the earthing wire coming from your guitars tailpeice to the casing of any pot. In this example the easiest spot was the Volume pot.
And thats it!
Test the controls before restringing the guitar by lightly taping the pickups with a Metal object.