FREE SHIPPING ON ALL DOMESTIC ORDERS $75+
How to install
STARTING WITH THE NECK PICKUP
Solder Your Neck Pickup's "Hot" also known as "+" on the diagram to the Left open Lug on the Neck Volume pot
Next, Solder the Neck Pickup's "Ground" also known as "-" on the diagram to the casing of the Neck volume. Just make sure the Braided part of the wire is far away from any hot joint/path.
Bridge Pickup Installation
Solder the Bridge pickups "hot" wire to the far left lug on the Bridge Volume Pot
Solder the Bridge Pickup's "Ground" also known as "-" on the diagram to the casing of the Bridge Volume pot. Just like before make sure the Braided part of the wire is far away from any hot joint/path.
Tailpeice Ground Installation
Solder the wire coming from your guitars tailpeice to the casing of any pot. In this example the Bridge Volume was the easiest.
Pass the output wires through the cavity to install the output jack
Solder the white output "hot" wire to hot lug on the output jack
Solder the colored cloth output wire to the inner Ground sleeve of the jack
And thats it!
Test the controls before restringing the guitar by lightly taping the pickups with a Metal object.