FREE SHIPPING ON ALL DOMESTIC ORDERS $75+
How to install
This instruction works for a 50s, Modern, Or Volume Bleed kits
STARTING WITH THE PICKUP GROUNDS
Solder Your all three Pickup's "grounds" also known as "-" on the diagram as well as the Tailpeice earthing wire if your guitar has one, to the the casing on the Volume Pot. If you are using a cheap or Low wattage Soldering iron, we would suggest soldering each ground to its own unique spot.
Next, Solder the Bridge Pickup's "hot" also known as "+" on the diagram to the first right side switch lug
Solder Your Middle Pickup's "hot" also known as "+" on the diagram to the second right side lug on the switch
Next, Solder the Neck Pickup's "hot" also known as "+" on the diagram to the third right side switch lug
Feed the Output wires of the kit through the cavity hole
Output jack installation
Next, Solder the volumes White cloth wire to the "hot" output lug on the jack (See diagram for reference)
Solder the colored cloth wire to the ground sleeve lug
And thats it!
Test the controls before restringing the guitar by lightly taping the pickups with a Metal object.